Thyzoon
Membre Sénior
Salut,
Je trouvé ça : OpenXsensor :
https://openxsensor.github.io/
https://github.com/openXsensor/openXsensor
C'est un ensemble de bibliothèques pour Arduino compatibles FR Sky, Multiplex, Jeti, Graupner Hott.
It is compatible with :
##Functionalities provided at your choice :##
Thierry
Je trouvé ça : OpenXsensor :
https://openxsensor.github.io/
https://github.com/openXsensor/openXsensor
C'est un ensemble de bibliothèques pour Arduino compatibles FR Sky, Multiplex, Jeti, Graupner Hott.
It is compatible with :
- The Multiplex receivers
- The Frsky receivers : D series (HUB protocol) and X series (Smart Port protocol)
- The Graupner receivers (Hott protocol)
- The Jeti receivers (EX protocol only)
##Functionalities provided at your choice :##
- Altimeter / Variometer
- Uses normally a MS5611 sensor (GY-63 or GY-86 module)
- Alternatives: a BMP085, a BMP180 or a BMP280 sensor can be used as first sensor
- A second barometric sensor can be added
- Possibility to change vario sensitivity and/or to switch between 2 vertical speeds from TX while flying
- Air Speed
- Uses normally a 4525DO-DS5AI001DP sensor
- Alternative: ADS1115 + MPXV7002DP (not tested yet)
- Can also be used by oXs to compensate vertical speed measurements (dTE)
- GPS
- Can be connected to a GPS (UBLOX NEO6/NEO7/NEO8) and transmit collected data
- Accelerometer/gyroscope
- Can be connected to a MPU6050 sensor (e.g. GY-86 module that have a baro sensor too)
- Can calculate vertical speed based on accelerations + baro (faster reaction of vario)
- Can calculate Roll and Pitch for attitude indicator (using a Lua script on OpenTx)
- Up to 6 voltages measurements with Arduino
- Battery voltage measurements
- Lipo battery cell measurements
- Up to 4 more accurate (and/or lower) voltages measurements with an extra ADC
- Uses an ADS1115 module
- Can be combined with Current and Airspeed sensor
- RPM sensor
- Current sensor
- Max Amp depends on the sensor being used (e.g. ACS712, ACS754, ACS758)
- Can calculate the consumed current
- Can use any sensor outputting voltage to provide other data
- Conversion from Volt to other units (e.g. to degree for temperature sensor)
- Can be associate with termistor
- Can calculate glider ratio to improve glider setup while flying
- Can generate several sequences of signal (e.g. for light sequencer)
Thierry