OS-57
Membre Sénior
Bonjour,
quelques Ultimate Krill ont déjà été achetés en France mais je ne vois pas encore de post sur cet avion ... alors je propose d'en ouvrir un.
Si des lecteurs possèdent ce kit, ce serait sympa de partager votre expérience sur le montage et mettre des photos.
voici le mien:
Ci-joint une vidéo de cet avion équipé d'un moteur MVVS 116 cc:
https://www.youtube.com/watch?v=kMRQrFBWgNQ
Les données générales du site:
ULTIMATE 300KS was developed by our team in co-operation with Sebastiano Silvestri (It.).
Kit is designed for patern flying and 3D aerobatics too. Slim wings with unique thin sharp airfoil allows to use gas engines from 110 to 125 ccm and final dry weight achieves promising 15 kg.
Description of airframe
- One piece top wing
- Bottom wings connected by strong wall C/F tube
- 4 ailerons on top surface textile hinges
- Central hinged elevators and rudder
- Fusselage with integrated ribs of Herex, Alutex and Aicraft plywood.
- Stainless steel thin wall tube cabane
- C/F interplane struts, no additional flying wires required !
- quick field assembly
- C/F landing gear with composite covers
- Holder for the fuel tank included
Technical data:
Lenght (With rudder, w/o spinner): 2366 mm
Wingspan: 2332 mm
Height (top wing): 799 mm
Wing surface area: 159 sq. dm
Take off weight (dry): 15 kg
Standart content of the kit:
Airframe (fusselage, cowling, rudder, stabs with elevators, clear canopy glued to the frame), wing and elevator C/F tubes, stainless steel cabane , both C/F interplane struts, C/F landing gears with composite covers, landing gear covers, wing screws, wing strut screws, wheel axis, canopy and cowling screws, black G/F set of horns, fuel tank holder.
Recomended accessories to be ordered:
- Spinner ULT 125mm 6/s
- SLH wheels 100/32
- SEC tail wheel V3
- RC equipment/rudder servo holder with ALU rudder arm
Le mien sera équipé d'un DLE 111 (l'ancien de mon Décathlon refait à neuf, actuellement chez Olivier Rogeau pour entretien et optimisation) et de 2 canisters JMB.
L'hélice est une Mejzlik carbone bipale 28x10.
Olivier
quelques Ultimate Krill ont déjà été achetés en France mais je ne vois pas encore de post sur cet avion ... alors je propose d'en ouvrir un.
Si des lecteurs possèdent ce kit, ce serait sympa de partager votre expérience sur le montage et mettre des photos.
voici le mien:
Ci-joint une vidéo de cet avion équipé d'un moteur MVVS 116 cc:
https://www.youtube.com/watch?v=kMRQrFBWgNQ
Les données générales du site:
ULTIMATE 300KS was developed by our team in co-operation with Sebastiano Silvestri (It.).
Kit is designed for patern flying and 3D aerobatics too. Slim wings with unique thin sharp airfoil allows to use gas engines from 110 to 125 ccm and final dry weight achieves promising 15 kg.
Description of airframe
- One piece top wing
- Bottom wings connected by strong wall C/F tube
- 4 ailerons on top surface textile hinges
- Central hinged elevators and rudder
- Fusselage with integrated ribs of Herex, Alutex and Aicraft plywood.
- Stainless steel thin wall tube cabane
- C/F interplane struts, no additional flying wires required !
- quick field assembly
- C/F landing gear with composite covers
- Holder for the fuel tank included
Technical data:
Lenght (With rudder, w/o spinner): 2366 mm
Wingspan: 2332 mm
Height (top wing): 799 mm
Wing surface area: 159 sq. dm
Take off weight (dry): 15 kg
Standart content of the kit:
Airframe (fusselage, cowling, rudder, stabs with elevators, clear canopy glued to the frame), wing and elevator C/F tubes, stainless steel cabane , both C/F interplane struts, C/F landing gears with composite covers, landing gear covers, wing screws, wing strut screws, wheel axis, canopy and cowling screws, black G/F set of horns, fuel tank holder.
Recomended accessories to be ordered:
- Spinner ULT 125mm 6/s
- SLH wheels 100/32
- SEC tail wheel V3
- RC equipment/rudder servo holder with ALU rudder arm
Le mien sera équipé d'un DLE 111 (l'ancien de mon Décathlon refait à neuf, actuellement chez Olivier Rogeau pour entretien et optimisation) et de 2 canisters JMB.
L'hélice est une Mejzlik carbone bipale 28x10.
Olivier